ARAST Electrostatic Generator Electronic Electrizer Middle School Physics Electrostatic Experiment

Price: AED 5,454.60
(as of Mar 10, 2025 20:40:16 UTC – Details)

?? Put the instrument flat on the platform, first connect the DC socket of the power supply to the corresponding socket on the right bottom rear of the instrument, then connect the power input plug to the AC 220V socket, and pull up the discharge stand to make it upright (after the discharge stand is pulled up Can be rotated 360 degrees), adjust the distance between the two discharge balls to about 30mm.
?? Turn on the power switch, cooperate with the high-vol e adjustment knob on the right side of the adjustment panel, a continuous discharge spark will appear between the two discharge balls (turn the high-vol e adjustment knob clockwise, the vol e will increase, otherwise the vol e will decrease), which proves the performance of the instrument Normally, a series of follow-up electrostatic experiments can be carried out.
?? There are two switches on the instrument panel. If you need the instrument to generate instantaneous high-vol e static electricity, you can press the button switch in the middle of the device, and your finger will leave the switch button, and the switch will be disconnected.
?? If you need a long time of high-vol e electrostatic supply in the experiment, you can use the switch on the left side of the instrument panel. It does not require the operator to keep his finger on the switch button.
?? When the instrument is used or the next experiment is to be performed, the power should be turned off, the two discharge balls should be touched and short-circuited, and the residual charge on them should be discharged to the operator from being hit by mistake.